Your shopping cart is empty!
OPWILL FTS510-S OTDR:
FTS510 Series OTDR Tester is an entirely new pad product released by OPWILL. It has rapid start technology and supports automatic and real-time test mode, which can guarantee engineers to examine and detect optical fibers or cables in the core, metro, and access network with high flexibility, efficiency, and convenience. Meanwhile, its operating system interface has high similarity with Android GUI and significantly simplifies the test procedure. FTS510 Series Handheld OTDR Test Set has 8 models to meet various test environments. Specific information has been demonstrated below:| Product | Wavelength | Dynamic Range |
| Regular OTDR | ||
| FTS510-E-ac | 1310/1550nm | 45/43dB |
| FTS510-M-ac | 1310/1550nm | 43/41dB |
| FTS510-H-ac | 1310/1550nm | 40/39dB |
| FTS510-N-ac | 1310/1550nm | 35/34dB |
| FTS510-L-ac | 1310/1550nm | 32/30dB |
| PON OTDR | ||
| FTS510-H-and | 1310/1550/1625nm | 40/39/38dB |
| FTS510-H-abcd | 1310/1490/1550/1625nm | 40/37/39/38dB |
| FTS510-H-ace | 1310/1550/1650nm | 40/39/38dB |
| FTS510-H-table | 1310/1490/1550/1650nm | 40/37/39/38dB |
| TECHNICAL SPECIFICATIONS | ||||||
| Wavelength | 1310±20 nm 1550±20 nm | 1490±20 nm 1625±10 nm | 1650±7 nm | |||
| Dynamic Range (SNR=1) at 25°C | 30 to 45 dB Typical at 20us | |||||
| Fiber under Test | 9μm/125μm single-mode optical fiber (ITU-T G.652) | |||||
| Pulse Width | 3, 5, 10, 30, 50, 100, 275, 500, 1000, 5000, 10000, 20000 ns | |||||
| Distance Range | 0.5, 2.5, 5, 15, 40, 80, 120, 160, 200, 240 km | |||||
| Event Dead Zone | £0.8 m | |||||
| Attenuation Dead Zone | £4m | |||||
| Sampling Resolution | 0.04 to 2m | |||||
| Sampling Points | 256K | |||||
| IOR | 1.30000 to 1.80000 | |||||
| Linearity | ±0.05 dB/dB | |||||
| Distance Uncertainty | ±(0.75+0.0050%×distance + sampling resolution) m | |||||
| Measurement Time | 1s to 300s, Real-time | |||||
| OTDR Port | FC/PC (Standard) SC/PC (Optional) LC/PC (Optional) | FC/APC (Standard iOTA) SC/APC (Optional iOTA) LC/APC (Optional iOTA) | ||||
| VFL | Wavelength | 650±20nm | ||||
| Output Power | +10dBm | |||||
| Operation mode | CW, 1Hz | |||||
| Power Meter (Optional) | Wavelength | 780 to 1800 nm | ||||
| Calibrated wavelengths | 850, 1300, 1310, 1490, 1550, 1625 nm | |||||
| Measurement range | +10 to -60 dBm | |||||
| Resolution | 0.01 dB | |||||
| Light Source (Use OTDR port, Optional) | Wavelength | 1310/1550 ±20 nm | ||||
| Output power | >-4 dBm | |||||
| Operation mode | CW, 270Hz, 330Hz, 1KHz, 2kHz | |||||
| Intelligent optical link topology analysis (Optional) | Intelligently combine different pulse widths, one time get loss and return loss of fiber and splitter. Multiple pulse acquisitions and algorithms deliver detailed information on every element on the fiber link. | |||||
| Intelligent network test tools (Optional) | The iNET includes PING, Trace Route, FTP upload and download, and HTTP features for Ethernet Link Fault check testing. | |||||
| Laser Safety | IEC 60825-1: 2007: CLASS 1; 21 CFR 1040.10 | |||||